apc.enabled can be set to 0 to disable APC. This is primarily useful when APC is statically compiled into PHP, since there is no other way to disable it (when compiled as a DSO, the extension line in php.ini can just be commented-out).

The number of shared memory segments to allocate for the compiler cache. If APC is running out of shared memory but you have already set apc.shm_size as high as your system allows, you can try raising this value.

The size of each shared memory segment in MB. By default, some systems (including most BSD variants) have very low limits on the size of a shared memory segment.

The optimization level. Zero disables the optimizer, and higher values use more aggressive optimizations. Expect very modest speed improvements. This is experimental.

A "hint" about the number of distinct source files that will be included or requested on your web server. Set to zero or omit if you're not sure; this setting is mainly useful for sites that have many thousands of source files.

Just like apc.num_files_hint, a "hint" about the number of distinct user cache variables to store. Set to zero or omit if not sure.

The number of seconds a cache entry is allowed to idle in a slot in case this cache entry slot is needed by another entry. Leaving this at zero means that your cache could potentially fill up with stale entries while newer entries won't be cached.

The number of seconds a user cache entry is allowed to idle in a slot in case this cache entry slot is needed by another entry. Leaving this at zero means that your cache could potentially fill up with stale entries while newer entries won't be cached.

The number of seconds that a cache entry may remain on the garbage-collection list. This value provides a fail-safe in the event that a server process dies while executing a cached source file; if that source file is modified, the memory allocated for the old version will not be reclaimed until this TTL reached. Set to zero to disable this feature.

On by default, but can be set to off and used in conjunction with positive apc.filters so that files are only cached if matched by a positive filter.

A comma-separated list of POSIX extended regular expressions. If any pattern matches the source filename, the file will not be cached. Note that the filename used for matching is the one passed to include/require, not the absolute path. If the first character of the expression is a + then the expression will be additive in the sense that any files matched by the expression will be cached, and if the first character is a - then anything matched will not be cached. The - case is the default, so it can be left off.

If compiled with MMAP support by using --enable-mmap this is the mktemp-style file_mask to pass to the mmap module for determing whether your mmap'ed memory region is going to be file-backed or shared memory backed. For straight file-backed mmap, set it to something like /tmp/apc.XXXXXX (exactly 6 Xs). To use POSIX-style shm_open/mmap put a .shm somewhere in your mask. e.g. /apc.shm.XXXXXX You can also set it to /dev/zero to use your kernel's /dev/zero interface to anonymous mmap'ed memory. Leaving it undefined will force an anonymous mmap.

On very busy servers whenever you start the server or modify files you can create a race of many processes all trying to cache the same file at the same time. This option sets the percentage of processes that will skip trying to cache an uncached file. Or think of it as the probability of a single process to skip caching. For example, setting apc.slam_defense to 75 would mean that there is a 75% chance that the process will not cache an uncached file. So, the higher the setting the greater the defense against cache slams. Setting this to 0 disables this feature.

When you modify a file on a live web server you really should do so in an atomic manner. That is, write to a temporary file and rename (mv) the file into its permanent position when it is ready. Many text editors, cp, tar and other such programs don't do this. This means that there is a chance that a file is accessed (and cached) while it is still being written to. This apc.file_update_protection setting puts a delay on caching brand new files. The default is 2 seconds which means that if the modification timestamp (mtime) on a file shows that it is less than 2 seconds old when it is accessed, it will not be cached. The unfortunate person who accessed this half-written file will still see weirdness, but at least it won't persist. If you are certain you always atomically update your files by using something like rsync which does this correctly, you can turn this protection off by setting it to 0. If you have a system that is flooded with io causing some update procedure to take longer than 2 seconds, you may want to increase this a bit.

Mostly for testing and debugging. Setting this enables APC for the CLI version of PHP. Normally you wouldn't want to create, populate and tear down the APC cache on every CLI request, but for various test scenarios it is handy to be able to enable APC for the CLI version of APC easily.

Prevent files larger than this value from getting cached. Defaults to 1M.

Be careful if you change this setting. The default is for this to be On which means that APC will stat (check) the script on each request to see if it has been modified. If it has been modified it will recompile and cache the new version. If you turn this setting off, it will not check. That means that in order to have changes become active you need to restart your web server. On a production server where you rarely change the code, turning stats off can produce a significant performance boost.

For included/required files this option applies as well, but note that if you are using relative path includes (any path that doesn't start with / on Unix) APC has to check in order to uniquely identify the file. If you use absolute path includes APC can skip the stat and use that absolute path as the unique identifier for the file.

On busy servers when you first start up the server, or when many files are modified, you can end up with all your processes trying to compile and cache the same files. With write_lock enabled, only one process at a time will try to compile an uncached script while the other processes will run uncached instead of sitting around waiting on a lock.

Logs any scripts that were automatically excluded from being cached due to early/late binding issues.

Optimize include_once() and require_once() calls and avoid the expensive system calls used.

RFC1867 File Upload Progress hook handler is only available if you compiled APC against PHP 5.2.0 or later. When enabled, any file uploads which includes a field called APC_UPLOAD_PROGRESS before the file field in an upload form will cause APC to automatically create an upload_key user cache entry where key is the value of the APC_UPLOAD_PROGRESS form entry.

Note that the file upload tracking is not threadsafe at this point, so new uploads that happen while a previous one is still going will disable the tracking for the previous.

Array
(
    [total] => 1142543
    [current] => 1142543
    [rate] => 1828068.8
    [filename] => test
    [name] => file
    [temp_filename] => /tmp/php8F
    [cancel_upload] => 0
    [done] => 1
)

Key prefix to use for the user cache entry generated by rfc1867 upload progress functionality.

Specify the hidden form entry name that activates APC upload progress and specifies the user cache key suffix.

The frequency that updates should be made to the user cache entry for upload progress. This can take the form of a percentage of the total file size or a size in bytes optionally suffixed with 'k', 'm', or 'g' for kilobytes, megabytes, or gigabytes respectively (case insensitive). A setting of 0 updates as often as possible, which may cause slower uploads.

This enables a lock-free local process shadow-cache which reduces lock contention when the cache is being written to.

The size of the local process shadow-cache, should be set to a sufficently large value, approximately half of apc.num_files_hint.